2020 Speed Twin headlight woes

Triumph Motorcycles Modern Classics
1

Greetings all,

I’ve broke the small wire that goes inside the headlight. I need to remove the black shroud to get at the motherboard. I’ve removed the 4 screws but it won’t budge. Is there some trick I’m missing?

Speed twin headlight pic
Speed twin headlight pic3000×4000 2.02 MB

2

Hi pdj. Welcome to the forum.

3

Thanks mate!

4

Take the torx head out holding the metal clip, could be a fixing behind there too. There may be some sort of sealant on there too, I’ve no experience with it but being electrical, good chance its sealed.

5

Thanks also for spotting that we didn’t have a Speed Twin section! We do now. :slight_smile:

6

image
image500×707 29.4 KB

Does this help?

1 Like
7

Have you taken the chrome trim off the front? Looks like a screw under it at the top (near the 11)

8

Hi and welcome…

9

Thanks all,
I can’t get the black cover off. It’s definitely glued on there good. I really don’t see any alternative except getting out my Dremel and cutting a hole in it so I can reattach the wires.